Features

• Each channel is equipped with a dedicated processor to ensure a perfect level of capacity calculation, timing, voltage, and current
• All channel is under isolated test, it can directly test the cells of battery
• Independent heat source channel, temperature control and speed regulation
• The LED light indicates the running status, testing status, matching status, alarm
• Fully compatibility with the batteries of Lead-acid, Li-ion, Polymer, Ni-MH, NiCd, and so
• Online test between computer and device, the setting and result is particular and
• The temperature monitoring function can monitor the temperature of each battery in real-time, and automatically stop the charging and discharging when the battery temperature reaches the set maximum temperature.
• With the work steps of Constant Current Discharge, Constant Power Discharge, Constant Resistance Discharge, Constant Current Charge, Constant Voltage Charge, Constant Current & Voltage Charge, Internal Resistance Test and Idle, etc.
• Work step automatically
• The charge and discharge parameter can be
• The matching can be processed, the test results can be matched according to the customized standard, and it can mark and display on the
• The recording function of the test
• With 4 Y-axis (voltage, current, capacity, temperature) and one x-axis (time) curve drawing ability, and data report
• The power failure data protection function allows continuing the test when power supply is restored and retains the data before a power
• The color of the test status bar is customized, which makes it easy to check the test status of all devices when the number of tests is large.

Technical Features

Packing details

Produce Size： 90*32.5*16 cm(L*W*H)

Pcs/Ctn:                     1 pc/ctn

Package Size: 103*53*27 cm(L*W*H)

G.W.:                    28.00 kgs

N.W.:            26.00 kgs

The post 6V/12V/24V Lithium Battery Module/Pack Auto Cycle Charge Discharge Tester DSF3020 34V 30A appeared first on Inverter and Battery, Solar Panel, Home UPS .

Features:

• Each channel is equipped with a dedicated processor to ensure a perfect level of capacity calculation, timing, voltage and current
• All channel is under isolated test, it can directly test the cells of the battery
• Independent heat source channel, temperature control and speed regulation
• The LED light indicates the running status, testing status, matching status, alarm
• Fully compatibility with the batteries of Lead-acid, Li-ion, Polymer, Ni-MH, NiCad, and so
• Online test between computer and device, the setting and result is particular and plentiful,
• With the work steps of Constant Current Discharge, Constant Power Discharge, Constant Resistance Discharge, Constant Current Charge, Constant Voltage Charge, Constant Current & Voltage Charge, Internal Resistance Test and Idle, etc.
• Work step automatically
• The charge and discharge parameters can be
• The matching can be processed, the test results can be matched according to the customized standard, and it can mark and display on the device.
• Battery anti-reverse connection protection and
• The recording function of the test
• With 3 Y-axis (voltage, current, capacity) and a time axis curve drawing ability, and data report
• The color of the test status bar is customized, which makes it easy to check the test status of all devices when the number of tests is
• Isolation channel battery temperature monitoring system, work step switching and charging stop can be realized by setting the temperature to ensure accurate and safe battery testing & maintenance with unattended.

TechnicalSpecification:

Packing Information:

Produce Size：  68.5*37.5*20.5 cm(L*W*H)

Pcs/Ctn:               1 pc/ctn

Package Size:      77*51*33 cm(L*W*H)

G.W.:                     25.60 kgs

N.W.:                     23.00 kgs

The post 20V 10A Hybrid Car Battery Charge Discharge Testing & Balance Maintenance Machine appeared first on Inverter and Battery, Solar Panel, Home UPS .

Features

• The Instrument uses a high-definition LCD screen display, each index is clear at a
• The parameter setup and parameter switching are set and switched by a “START” switch and a “SET” All parameters (voltage, current, mode) settings have the saving function.
• Intelligent speed fan can run continuously, delay the power-off of the fan, and blow off the remaining
• Multiple protection functions, such as reverse connection protection, over-voltage and over-current protection, over-temperature protection,
• The work steps can automatically switch according to the set parameters and have automatic cycle charge and discharge function
• Data protection startup: If the connection cables disconnect from the battery during the charging and discharging, after reconnecting the cables with the battery, press and hold the “Start” button to continue working.
• Power off data protection When a power failure occurs during the test, the test data before the power failure is retained. After the power is restored, the test can continue.
• Modular design, easy maintenance and replacement of
• Two operation methods: Panel & After installing the specified software, the device can be managed and operated through the computer: charge-discharge setting, data sampling, test report imports and exports, test data analysis, charge-discharge curves drawing.
• One computer can manage multiple devices simultaneously through a switch, making testing more efficient and
• Intelligent battery temperature monitoring system monitors the real-time temperature of the battery at any time, testing and maintenance are safer and easier.

Technical Features

Packing details

Model No.:                                  BPT50 Product Size(L*W*H)： 30*53*44 CM Pcs/Ctn:                                                                                      1 PC / CTN

Package Size(L*W*H):    41*56*53 CM

G.W.:                                   38 KG

N.W.:                                   20 KG

The post 99V 50A Lithium/Lead-acid Batteries arge Discahrge Performance Tester 50 appeared first on Inverter and Battery, Solar Panel, Home UPS .

Features:

• Each channel is equipped with a dedicated processor to ensure a perfect level of capacity calculation, timing, voltage and current
• All channel is under isolated testing; it can directly test the cells of the battery
• Independent heat source channel, temperature control and speed regulation
• The LED light indicates the running status, testing status, matching status, alarm
• Fully compatibility with the batteries of Li-ion, Polymer, Ni-MH, NiCd, and so
• Fully compatible installation with 18650, 26650, 36650, pouch, block
• Online test between computer and device, the setting and result is particular and plentiful,
• With the work steps of Constant Current Discharge, Constant Power Discharge, Constant Resistance Discharge, Constant Current Charge, Constant Voltage Charge, Constant Current & Voltage Charge, Internal Resistance Test and Idle, etc.
• Work step automatically
• The charge and discharge parameters can be
• The matching can be processed, the test results can be matched according to the customized standard, and it can mark and display on the
• Battery anti-reverse connection protection and
• The recording function of the test process
• With 3 Y-axis (voltage, current, capacity) and a time axis curve drawing ability, and data report
• The color of the test status bar is customized, which makes it easy to check the test status of all devices when the number of tests is

Technical Specification:

Packing Information:

Produce Size： 67.5*340*17.9 cm(L*W*H) Pcs/Ctn:                            1 pc/ctn

Package Size: 77*46*27 cm(L*W*H) G.W.:                             26.00 kgs

N.W.:                   24.00 kgs

The post 5V 20A Li-Ion Cell Capacity Grading And Matching Charge Discharge Tester appeared first on Inverter and Battery, Solar Panel, Home UPS .

Features:

• Instrument displays by LCD, each index is clear at a
• The parameter setup and parameter switching are set and switched by a “START” switch and a “SET” All parameters (voltage, current, mode) settings have the saving function.
• Intelligent speed fan can run continuously, delay the power-off of the fan, and blow off the remaining
• Polarity protection, anti-reverse connection, and so
• Each circuit is the independent module, no influence each other
• Maximum cycle number is 99, which can be used as battery aging
• Data protection startup: If the connection cables disconnected from the battery during the charging and discharging, after reconnecting the cables with the battery, press and hold the “Start” button to continue working.
• Power-off memory
• Modular design, easy maintenance and replacement of
• Two operation methods: Panel & Software. After installing the specified software, the device can be managed and operated through the computer: charge-discharge setting, data sampling, test report imports and exports, test data analysis, charge-discharge curves
• One computer can manage multiple devices simultaneously through a switch, make testing more efficient and
• Intelligent battery temperature monitoring

Technical Specification:

The post 12V-84V Lithium Battery Pack Automatic Cycle Charging Discharging Test Machine DSF40 appeared first on Inverter and Battery, Solar Panel, Home UPS .

      Features:

• Instrument displays by LCD, each index is clear at a
• The parameter setup and parameter switching are set and switched by a “START” switch and a “SET” All parameters(voltage, current, mode) setting have the saving function.
• Intelligent speed fan can run continuously, delay the power-off of the fan, and blow-off the remaining
• Polarity protection, anti-reverse connection, and so
• External charger can be connected to charge the battery and record the charging
• The external charger can be connected to realize automatic cycle charging and discharging function, the maximum number of cycles is 99 times.
• Data protection startup: If the connection cables disconnected from the battery during the charging and discharging, after reconnecting the cables with the battery, press and hold the “Start” button to continue working.
• Power-off memory
• Modular design, easy maintenance and replacement of accessories

Technical Specification:

Packing Information:

Model No.:                                  BCT40 Product Size(L*W*H)： 48*41*14 cm Pcs/Ctn:                                                                                      1 pcs/ctn

Package Size(L*W*H):    58*51.5*24.5 cm

G.W.:                                   14.45 kgs

N.W.:                                   12.45 kgs

The post Ad-Acid/Lithium Battery Pack Series charge Capacity Tester appeared first on Inverter and Battery, Solar Panel, Home UPS .

Features

• Each channel is equipped with a dedicated processor to ensure a perfect level of capacity calculation, timing, voltage, and current
• All channel is under isolated test, it can directly test the cells of battery
• Independent heat source channel, temperature control and speed regulation
• The LED light indicates the running status, testing status, matching status, alarm
• Fully compatibility with the batteries of Lead-acid, Li-ion, Polymer, Ni-MH, NiCd, and so
• Online test between computer and device, the setting and result is particular and
• The temperature monitoring function can monitor the temperature of each battery in real-time, and automatically stop the charging and discharging when the battery temperature reaches the set maximum temperature.
• With the work steps of Constant Current Discharge, Constant Power Discharge, Constant Resistance Discharge, Constant Current Charge, Constant Voltage Charge, Constant Current & Voltage Charge, Internal Resistance Test and Idle, etc.
• Work step automatically
• The charge and discharge parameter can be
• The matching can be processed, the test results can be matched according to the customized standard, and it can mark and display on the device.
• The recording function of the test
• With 3 Y-axis (voltage, current, capacity) and a time axis curve drawing ability, and data report
• The color of the test status bar is customized, which makes it easy to check the test status of all devices when the number of tests is

Technical Specification:

The post 23V 50A Lithium/Lead-acid Battery Auto Cycle Charge Discharge Tester DSF2050 for 6V/8V/12V/16V/18V Batteries appeared first on Inverter and Battery, Solar Panel, Home UPS .

Features:

• Each channel is equipped with a dedicated processor to ensure a perfect level of capacity calculation, timing, voltage, and current control.
• All channel is under isolated test, it can directly test the cells of battery
• Independent heat source channel, temperature control and speed regulation
• The LED light indicates the running status, testing status, matching status, alarm
• Fully compatibility with the batteries of Lead-acid, Li-ion, Polymer, Ni-MH, NiCd, and so
• Online test between computer and device, the setting and result is particular and
• The temperature monitoring function can monitor the temperature of each battery in real-time, and automatically stop the charging and discharging when the battery temperature reaches the set maximum
• With the work steps of Constant Current Discharge, Constant Power Discharge, Constant Resistance Discharge, Constant Current Charge, Constant Voltage Charge, Constant Current & Voltage Charge, Internal Resistance Test and Idle,
• Work step automatically
• The charge and discharge parameter can be
• The matching can be processed, the test results can be matched according to the customized standard, and it can mark and display on the device.
• The recording function of the test
• With 4 Y-axis (voltage, current, capacity, temperature) and one x-axis (time) curve drawing ability, and data report
• The power failure data protection function allows continuing the test when power supply is restored and retains the data before a power failure.
• The color of the test status bar is customized, which makes it easy to check the test status of all devices when the number of tests is large.

Technical Specification:

Packing Information:

Produce Size： 90*32.5*16 cm(L*W*H) Pcs/Ctn:                          1 pc/ctn

Package Size: 103*53*27 cm(L*W*H) G.W.:                          28.00 kgs

N.W.:                 26.00 kgs

The post 34V 30A Lithium Battery Module/Pack Automatic Cycle Charge Discharge Tester DSF3020 appeared first on Inverter and Battery, Solar Panel, Home UPS .

Features

• Each channel is equipped with a dedicated processor to ensure perfect levels of capacity calculation, timing, voltage and current control.
• All channels are tested in isolation, allowing direct testing of the cells within the battery
• Independent heat source channel with temperature controlled speed control
• LED indicators for operating status, test status, matching status, alarm
• Fully compatible with lead acid batteries, lithium batteries, NiMH, NiCd batteries,
• Computer and device online testing, parameter setting and test results are uniquely
• Work steps with constant current discharge, constant power discharge, constant resistance discharge, constant current charge, constant voltage charge, constant current and constant voltage charge, internal resistance test, idle,
• Work steps automatically
• Charge and discharge parameters can be
• Test results can be matched against custom criteria and can be identified on the
• Data recording function during the
• Data reporting
• It has 4 Y-axes (voltage, current, capacity, temperature) and a time X-axis curve drawing
• Customized test status bar colour for easy viewing of all devices when testing larger
• Built-in intelligent battery temperature management system to monitor battery temperature in real time and automatically manage the charging process by setting temperature parameters.

The battery temperature alarm function enhances security in testing

Technical Specification

• Input Power Supply: AC 200V-245V@50Hz/60Hz 10A
• Channel Number: 8
• High Voltage Insulation Between Channel: AC1000V/2min Normal
• Channel Control Mode: Independent control
• Host Computer Communication Methods: based on TCP/IP protocol
• Communication Port: LAN
• Test Report Output Method: EXCEL
• Server Disk Configuration: >100GB
• Server Operation System: WINDOWS XP or above system with LAN port configuration
• Operation Ambient Temperature: 0 ºC – 40 ºC
• Single Channel Technical Parameters

Packing Information

Packing Rate: 1PC/CTN

CTN Size…….: 75*51*33CM

G.W/N.W……: 26KG/24KG

The post 20V 10A Battery Module/Pack Charge Discharge Tester DSF2010 appeared first on Inverter and Battery, Solar Panel, Home UPS .

Features:

• Each channel is equipped with a dedicated processor to ensure a perfect level of capacity calculation, timing, voltage and current control.
• All channel is under isolated test, it can directly test the cells of the battery
• Independent heat source channel, temperature control and speed regulation
• The LED light indicates the running status, testing status, matching status, alarm
• Fully compatibility with the batteries of Li-ion, Polymer, Ni-MH, NiCd, and so
• Fully compatible installation with cylindrical, pouch, prismatic
• Online test between computer and device, the setting and result is particular and plentiful,
• With the work steps of Constant Current Discharge, Constant Power Discharge, Constant Resistance Discharge, Constant Current Charge, Constant Voltage Charge, Constant Current & Voltage Charge, Internal Resistance Test and Idle,
• Work step automatically
• The charge and discharge parameters can be
• The matching can be processed, the test results can be matched according to the customized standard, and it can mark and display on the device.
• Battery anti-reverse connection protection and
• The recording function of the test process
• With 3 Y-axis (voltage, current, capacity) and a time axis curve drawing ability, and data report
• The color of the test status bar is customized, which makes it easy to check the test status of all devices when the number of tests is large.

Technical Specification:

Packing Information:

Produce Size： 68.5*37.5*20.5 cm(L*W*H) Pcs/Ctn:                          1 pc/ctn

Package Size: 76*51*32 cm(L*W*H) G.W.:                          25.60 kgs

N.W.:                 23.00 kgs

The post High-Precision Li-Ion Cell Charge Discharge Tester 5V 50A appeared first on Inverter and Battery, Solar Panel, Home UPS .