| Model Name Number | ENPHASE IQ7 PLUS |
| Solar Panel Pairings | 235 watt – 440 watt |
| Module compatibility | 60-cell & 72-cell PV modules |
| Maximum input DC voltage | 60 v |
| Operating range | 16 v – 60 v |
| Min/Max start voltage | 22 v / 60 v |
| Max DC short circuit current | 15 A |
| Peak output power | 295 VA |
| Maximum output power | 290 VA |
| Nominal (L-N) voltage/range | 230 V / 184-276 V |
| Nominal frequency | 50 Hz |
| EFFICIENCY | 96.5% |
| Temperature range | -40ºC to +65ºC |
| Connector type | MC4 (or Amphenol H4 UTX with additional Q-DCC-5 adapter) |
| Dimensions (H X W X D) | 212 mm x 175 mm x 30.2 mm |
| Weight | 1.08 kg |
| Environmental category | Outdoor-IP 67 |
-54%Sold out
Previous product
Back to products
Luminous Solar Battery Tubular 200AH- LPTT12200L
Original price was: ₹28,630.00.₹19,900.00Current price is: ₹19,900.00.
Next product
Luminous ToughX TX100L Tall Tubular Battery Trolley
Original price was: ₹2,500.00.₹1,599.00Current price is: ₹1,599.00.
Enphase IQ7 PLUS Microinverter
Original price was: ₹19,999.00.₹9,199.00Current price is: ₹9,199.00.
Easy to Install
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
Productive and Reliable
- Optimized for high powered 60-cell, 72-cell* and 96-cell* modules
- More than a million hours of testing
- Class II double-insulated enclosure
Smart Grid Ready
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
The IQ Series Micros extend the reliability standards set forth by previous generations and undergo over a million hours of power-on testing, enabling Enphase to provide an industry-leading warranty. 10 years commencing on the date the Covered Product is activated* in Enphase’s Enlighten™ system (such applicable date is referred to as the “Warranty Start Date”)
Out of stock
Description
Related products
Luminous Nxi 1 Kw On Grid Solar Inverter
Best-in-class reliability and compliance to safety standards.
- Maximum Power Point Tracking
- IP65 Protection
- Remote Monitoring
- Anti-Islanding Protection
- Remote Communication
- MNRE & IEC Compliance
- 80% Max. efficiency
- Wide voltage range and low start-up voltage
- Friendly and adaptable connection to the grid
- Super high frequency switching technology
- Precise MPPT algorithm
- Compact and lightweight
- WiFi/GPRS Real time monitoring
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Display
Luminous Solar Inverter – NXG 1150
Luminous Solar Inverter - NXG 1150 is a 850VA pure sine wave solar inverter with ISOT technology. It can be used to power homes, offices, and shops. It has a maximum supported panel power of 850Wp and a charge controller rating of 50 Amp. It supports single battery and comes with a 24-month warranty.
Product Features: -
Capacity (VA): 850VA Operating Voltage 90V-290V Max supported panel power: 12V upto 850 Wp Charge Controller Rating - 50 Amp Supports single battery 24 Month Warranty BIS certified as per IS/IEC standards which is mandatory for all solar inverters 3 User Settable Saving Modes: Solar Mode, Solar+Grid Mode and Grid+Solar Mode Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT). Max Capacity Utilization: Connect Solar Panels equivalent to Solar Inverter’s VA ratings. Powerful charging even at low voltage (90V) making it ideal for areas having low voltage issues. Pure Sine wave output for safety of your sensitive appliances and noiseless operations. Safe for your family and appliances: Short-circuit protection, Over temperature protection, Overload protection, No load shutdown.
Luminous Solar Inverter – NXG 2350
Capacity (VA): 2000VA
Operating Voltage: 90V-290V
Max supported panel power: 24V upto 2000 Wp
Charge Controller Rating: 55 Amp
Supports double battery
24 Months Warranty
Solar Mode: The inverter uses only solar power to power your appliances.
Grid+Solar Mode: The inverter uses grid power to power your appliances and stores solar power in the battery for later use.
BIS certified as per IS/IEC standards which is mandatory for all solar inverters
3 User Settable Saving Modes: Solar Mode, Solar+Grid Mode and Grid+Solar Mode
Intelligent load sharing: This feature ensures that the inverter distributes the load evenly between the solar power and the battery power.
View daily solar generation data in all new LCD display screen
Max Capacity Utilization: Connect Solar Panels equivalent to Solar Inverter’s VA ratings
Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT)
Pure Sine wave output for safety of your sensitive appliances and noiseless operations
Safe for your family and appliances: Short-circuit protection, Over temperature protection, Overload protection, No load shutdown
Luminous Solarverter PRO PCU – 5KVA / 48V
Luminous Solarverter PRO PCU - 5KVA / 48V is a solar inverter that can power your home or business with clean, renewable energy. It has a capacity of 5 kilovolt-amperes (KVA), which means it can support up to 5,000 watts of load. The inverter is compatible with 48-volt solar panels and has an MPPT charge controller that can maximize the amount of power generated by your solar panels.
Here are some of the features of the Luminous Solarverter PRO PCU - 5KVA / 48V:
The inverter is also equipped with a number of safety features, including overvoltage protection, undervoltage protection, and overload protection. It is also certified by BIS, which ensures that it meets the highest standards of quality and safety.
Product Features: -
- Rated AC power - 230V (single phase)
- Max Supported Panel Power - 5000 Wp, Input Voltage Range (Vmp) – 110V-180V
- Charge Controller - MPPT, Input Voltage Range (Voc)- 130V-220V
- Nominal Battery Bank Voltage - 48V
- BIS certified solar inverter
- In-built TDR for loads with heavy in-rush current
- Inbuilt MPPT charge controller to maximize solar generation from solar panels
- Inbuilt isolation transformer to protect from grid surges and noise
- User selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display
- MCB protection against short circuit protection
- Pure sine wave output for better performance & safety of connected loads
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Enphase IQ 8D Microinverter
Coming Soon.....
Enphase IQ 8D Microinverter is Dual PV model, it has unique design with high improved power(energy), safe, powerful and reliable and up to date which means latest technology.
Safe
• All AC cabling system without high-voltage DC that can cause arc fault fires
• Built-in rapid shutdown capability allows microinverters to shutdown safely and automatically
• Safer in extreme outdoor conditions, with NEMA 6 rating
Powerful
• Higher energy production with distributed architecture
• Patented burst mode for additional energy generation in low light conditions
• 8th generation, software-driven inverter architecture with SWIFT ASIC
Reliable
• Higher system uptime with no single point of failure
• Industry-leading 25-year standard warranty
• Million hours of rigorous power-on testing
Enphase IQ7 PLUS Microinverter (Pack of 6)
Easy to Install
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Optimized for high powered 60-cell, 72-cell* and 96-cell* modules
- More than a million hours of testing
- Class II double-insulated enclosure
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
Luminous Solarverter PRO PCU – 3 KVA
Product Features: -
Rated AC power - 230V (single phase) Max Supported Panel Power - 3500 Wp,
Input Voltage Range (Vmp) – 60V-120V Charge Controller - MPPT,
Input Voltage Range (Voc)- 75V-150V Nominal Battery Bank Voltage - 36V BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Enphase Envoy-S Metered Multiphase
MODEL NUMBER
Envoy-S Metered Multiphase
ENV-S-WM-230
Enphase Envoy-S communications gateway with integrated PV and consumption metering.
Includes two CTs (100A limit). Production and consumption meter: +/-1% accuracy.
ACCESSORIES (Order Separately)
Current transformers (CTs)
CT-100-SPLIT
Lead length 4 m, extendable to 213 m depending on wire type (see installation manual).
WxHxD: 61 mm x 51 mm x 35 mm.
Order extra CTs if monitoring multiple phases.
Enphase Mobile Connect™
CELLMODEM-02
Plug and play industrial grade mobile modem with five-year data plan for systems up to 60
microinverters. (Available where there is adequate mobile service in the installation area.)
Power line communications phase coupler Required for multiphase PV systems
POWER REQUIREMENTS
Hardwired 230 VAC or 400Y/230 VAC, 50 Hz
Max 20A over current protection required
CAPACITY
Number of microinverters polled Up to 600
MECHANICAL DATA
Dimensions (WxHxD) 213 x 126 x 45 mm
Weight 0.5 kg
Ambient temperature range -40° to 65° C
-40° to 46° C if installed in an enclosure
Environmental rating IP30. For installation indoors or in an IP54-rated (or better) enclosure.
Altitude To 2000 meters
USB ports Two USB 2.0 ports, auto-sensing, auto-negotiation
INTERNET CONNECTION OPTIONS
Integrated Wi-Fi 802.11b/g/n (2.4 GHz, 5 GHz)
Ethernet Optional, 802.3, Cat5E (or Cat 6) UTP Ethernet cable (not included)
Mobile Optional, CELLMODEM-02 (not included)
COMPLIANCE
Compliance IEC/EN 61010-1:2010,
EN50065-1, EN61000-4-5, EN61000-6-1, EN61000-6-2
Reviews
There are no reviews yet.