- Enables web-based monitoring and control
- Bidirectional communications for remote upgrades
- Power export limiting and phase imbalance management*
- AS/NZS 4777.2:2015 DRM (Demand Response Mode) ready*
- Easy system configuration using the Enphase Installer Toolkit™ mobile app
- Flexible networking with Wi-Fi, Ethernet, or mobile
- DIN rail mount
- Designed for installation indoors or in an outdoor enclosure
- Five-year warranty
Enphase Envoy-S Metered Multiphase
₹46,750.00 Original price was: ₹46,750.00.₹19,599.00Current price is: ₹19,599.00.
MODEL NUMBER
Envoy-S Metered Multiphase
ENV-S-WM-230
Enphase Envoy-S communications gateway with integrated PV and consumption metering.
Includes two CTs (100A limit). Production and consumption meter: +/-1% accuracy.
ACCESSORIES (Order Separately)
Current transformers (CTs)
CT-100-SPLIT
Lead length 4 m, extendable to 213 m depending on wire type (see installation manual).
WxHxD: 61 mm x 51 mm x 35 mm.
Order extra CTs if monitoring multiple phases.
Enphase Mobile Connect™
CELLMODEM-02
Plug and play industrial grade mobile modem with five-year data plan for systems up to 60
microinverters. (Available where there is adequate mobile service in the installation area.)
Power line communications phase coupler Required for multiphase PV systems
POWER REQUIREMENTS
Hardwired 230 VAC or 400Y/230 VAC, 50 Hz
Max 20A over current protection required
CAPACITY
Number of microinverters polled Up to 600
MECHANICAL DATA
Dimensions (WxHxD) 213 x 126 x 45 mm
Weight 0.5 kg
Ambient temperature range -40° to 65° C
-40° to 46° C if installed in an enclosure
Environmental rating IP30. For installation indoors or in an IP54-rated (or better) enclosure.
Altitude To 2000 meters
USB ports Two USB 2.0 ports, auto-sensing, auto-negotiation
INTERNET CONNECTION OPTIONS
Integrated Wi-Fi 802.11b/g/n (2.4 GHz, 5 GHz)
Ethernet Optional, 802.3, Cat5E (or Cat 6) UTP Ethernet cable (not included)
Mobile Optional, CELLMODEM-02 (not included)
COMPLIANCE
Compliance IEC/EN 61010-1:2010,
EN50065-1, EN61000-4-5, EN61000-6-1, EN61000-6-2
Out of stock
Related products
Luminous Solarverter Pro PCU 3.5 Kva 48V
- Rated AC power - 230V (single phase)
- Max Supported Panel Power - 3500 Wp, Input Voltage Range (Vmp) – 110V-180V
- Charge Controller - MPPT, Input Voltage Range (Voc)- 130V-220V
- Nominal Battery Bank Voltage - 48V
- BIS certified solar inverter
- In-built TDR for loads with heavy in-rush current
- Inbuilt MPPT charge controller to maximize solar generation from solar panels
- Inbuilt isolation transformer to protect from grid surges and noise
- User selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display
- MCB protection against short circuit protection
- Pure sine wave output for better performance & safety of connected loads
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Luminous Solar Inverter – NXG 850
Product features:-
Capacity (VA): 500VA Operating Voltage 90V-290V Max supported panel power: 12V upto 500 Wp Charge Controller Rating - 30 Amp Supports single battery 24 Month Warranty BIS certified as per IS/IEC standards which is mandatory for all solar inverters 3 User Settable Saving Modes: Solar Mode, Solar+Grid Mode and Grid+Solar Mode Power savings of 1.5 - 3 units per day* with the help of Intelligent Solar Optimization Technique (iSOT). Max Capacity Utilization: Connect Solar Panels equivalent to Solar Inverter’s VA ratings. Powerful charging even at low voltage (90V) making it ideal for areas having low voltage issues. Pure sine wave output: This ensures that the inverter can power sensitive appliances without causing any damage. Safe for your family and appliances: Short-circuit protection, Over temperature protection, Overload protection, No load shutdown. Wide operating voltage range: The inverter can operate in a wide voltage range of 90V to 290V, making it suitable for areas with fluctuating power supply. Intelligent Solar Optimization Technique (ISOT): This technology helps to maximize the use of solar energy by intelligently switching between solar and grid power. 3 user-settable saving modes: The inverter has three user-settable saving modes: Solar Mode, Solar+Grid Mode, and Grid+Solar Mode. Max capacity utilization: The inverter can be connected to solar panels up to its VA rating, which helps to maximize the use of solar energy. Intelligent load sharing: The inverter intelligently shares the load between solar and battery power, which helps to extend the battery life.Enphase IQ7 A Microinverter
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Optimized for high powered 60-cell, 72-cell* and 96-cell* modules
- More than a million hours of testing
- Highest CEC efficiency of 97%
- Class II double-insulated enclosure
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
Enphase IQ 8D Microinverter
Luminous Solarverter PRO PCU – 5KVA / 48V
- Rated AC power - 230V (single phase)
- Max Supported Panel Power - 5000 Wp, Input Voltage Range (Vmp) – 110V-180V
- Charge Controller - MPPT, Input Voltage Range (Voc)- 130V-220V
- Nominal Battery Bank Voltage - 48V
- BIS certified solar inverter
- In-built TDR for loads with heavy in-rush current
- Inbuilt MPPT charge controller to maximize solar generation from solar panels
- Inbuilt isolation transformer to protect from grid surges and noise
- User selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display
- MCB protection against short circuit protection
- Pure sine wave output for better performance & safety of connected loads
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Enphase IQ7 PLUS Microinverter (Pack of 6)
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Optimized for high powered 60-cell, 72-cell* and 96-cell* modules
- More than a million hours of testing
- Class II double-insulated enclosure
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
Luminous Solar Inverter – NXG 2350
Luminous Nxi 2 Kw On Grid Solar Inverter
- Maximum Power Point Tracking
- IP65 Protection
- Remote Monitoring
- Anti-Islanding Protection
- MNRE & IEC Compliance
- 97.% Max. efficiency
- Wide voltage range and low start-up voltage
- Friendly and adaptable connection to the grid
- Super high frequency switching technology
- Precise MPPT algorithm
- Compact and lightweight
- WiFi/GPRS Real time monitoring
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Displa

Reviews
There are no reviews yet.