| INPUT DATA (DC) | IQ8D-72-E-US |
| Commonly used modules for pairing1 | 235 W – 440 W + (two modules per microinverter) |
| Module compatibility1 | 60-cell and 72-cell PV modules with full or split cell configuration |
| Maximum input DC voltage | 119 V |
| Peak power tracking voltage | 60 V – 95 V |
| Operating range | 30 V – 119 V |
| Min/Max start voltage | 35 V / 119 V |
| Max DC short circuit current (module Isc) | 15 A |
| Overvoltage class DC ports | II |
| DC port backfeed current | 0 A |
| PV array configuration | 2 x 1 ungrounded array; No additional DC side protection required; AC side protection requires max 20 A per three-phase branch circuit |
| OUTPUT DATA (AC) | |
| Peak output power | 640 VA |
| Maximum continuous output power | 633 VA |
| Nominal (L-L) voltage/range2 | 208 V / 183-229 V |
| Maximum continuous output current | 3.04 A (208 V) |
| Nominal frequency | 60 Hz |
| Extended frequency range | 50 – 68 Hz |
| AC short circuit fault current over 3 cycles | 5.8 Arms |
| Maximum microinverters per 20 A branch circuit3 | 9 |
| Overvoltage class AC port | III |
| AC port backfeed current | 18mA |
| Power factor setting | 1.0 |
| Power factor (adjustable) | 0.7 – 1.0, leading or lagging |
| EFFICIENCY @208 V | |
| MPPT efficiency | 99.5 % |
| CEC weighted efficiency | 97.5 % |
| MECHANICAL DATA | |
| Ambient temperature range | -40ºC to +60ºC (-40ºF to +140ºF)4 |
| Relative humidity range | 4% to 100% (condensing) |
| DC connector type | Enphase EN4 bulkhead |
| Dimensions (HxWxD) | 287 mm x 250 mm x 38 mm (11.2” x 9.8” x 1.5”) without bracket |
| Weight | 1.55 kg (3.4 lbs) |
| Cooling | Natural convection |
| Approved for wet locations | Yes |
| Enclosure | Class II double-insulated, corrosion resistant polymeric enclosure |
| Environmental category / UV exposure rating | IP67 / Sunlight resistant |
| FEATURES | |
| Communication | Power Line Communication (PLC) |
| Monitoring | Enlighten Manager and MyEnlighten monitoring options.
Both options require installation of an Enphase IQ Commercial Envoy. |
| Disconnecting means | The AC and DC connectors have been evaluated and approved by UL for use as the load-break disconnect required by NEC 690 and C22.1-2018 Rule 64-220. |
| Compliance (pending) | CA Rule 21 (UL 1741-SA)
UL 62109-1, UL1741/IEEE1547, FCC Part 15 Class B, ICES-0003 Class B, UL 3741 UL Standard for Safety, Photovoltaic Hazard Control (Pending), UL 1699B UL Standard for Safety, Photovoltaic (PV) Arc-Fault Circuit Protection (Pending), CAN/CSA-C22.2 NO. 107.1-01 This product will be UL listed as PV Hazard Reduction System Component. When installed in accordance with the rapid shutdown PV array listing or field labeling instructions the resulting array complies with the requirements for rapid shutdown in accordance with NEC Section 690.12 (B) (2) (1). |
Sold out
Previous product
Back to products
Enphase Envoy-S Metered Multiphase
Original price was: ₹46,750.00.₹19,599.00Current price is: ₹19,599.00.
Enphase IQ 8D Microinverter
Coming Soon…..
Enphase IQ 8D Microinverter is Dual PV model, it has unique design with high improved power(energy), safe, powerful and reliable and up to date which means latest technology.
Safe
• All AC cabling system without high-voltage DC that can cause arc fault fires
• Built-in rapid shutdown capability allows microinverters to shutdown safely and automatically
• Safer in extreme outdoor conditions, with NEMA 6 rating
Powerful
• Higher energy production with distributed architecture
• Patented burst mode for additional energy generation in low light conditions
• 8th generation, software-driven inverter architecture with SWIFT ASIC
Reliable
• Higher system uptime with no single point of failure
• Industry-leading 25-year standard warranty
• Million hours of rigorous power-on testing
Description
Related products
Luminous Nxi 1 Kw On Grid Solar Inverter
Best-in-class reliability and compliance to safety standards.
- Maximum Power Point Tracking
- IP65 Protection
- Remote Monitoring
- Anti-Islanding Protection
- Remote Communication
- MNRE & IEC Compliance
- 80% Max. efficiency
- Wide voltage range and low start-up voltage
- Friendly and adaptable connection to the grid
- Super high frequency switching technology
- Precise MPPT algorithm
- Compact and lightweight
- WiFi/GPRS Real time monitoring
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Display
Enphase Envoy-S Metered Multiphase
MODEL NUMBER
Envoy-S Metered Multiphase
ENV-S-WM-230
Enphase Envoy-S communications gateway with integrated PV and consumption metering.
Includes two CTs (100A limit). Production and consumption meter: +/-1% accuracy.
ACCESSORIES (Order Separately)
Current transformers (CTs)
CT-100-SPLIT
Lead length 4 m, extendable to 213 m depending on wire type (see installation manual).
WxHxD: 61 mm x 51 mm x 35 mm.
Order extra CTs if monitoring multiple phases.
Enphase Mobile Connect™
CELLMODEM-02
Plug and play industrial grade mobile modem with five-year data plan for systems up to 60
microinverters. (Available where there is adequate mobile service in the installation area.)
Power line communications phase coupler Required for multiphase PV systems
POWER REQUIREMENTS
Hardwired 230 VAC or 400Y/230 VAC, 50 Hz
Max 20A over current protection required
CAPACITY
Number of microinverters polled Up to 600
MECHANICAL DATA
Dimensions (WxHxD) 213 x 126 x 45 mm
Weight 0.5 kg
Ambient temperature range -40° to 65° C
-40° to 46° C if installed in an enclosure
Environmental rating IP30. For installation indoors or in an IP54-rated (or better) enclosure.
Altitude To 2000 meters
USB ports Two USB 2.0 ports, auto-sensing, auto-negotiation
INTERNET CONNECTION OPTIONS
Integrated Wi-Fi 802.11b/g/n (2.4 GHz, 5 GHz)
Ethernet Optional, 802.3, Cat5E (or Cat 6) UTP Ethernet cable (not included)
Mobile Optional, CELLMODEM-02 (not included)
COMPLIANCE
Compliance IEC/EN 61010-1:2010,
EN50065-1, EN61000-4-5, EN61000-6-1, EN61000-6-2
Luminous Nxi 4 kw On Grid Solar Inverter
- Super high frequency switching technology
- Precise MPPT algorithm
- Compact and lightweight
- WiFi and Real time monitoring
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Display
- Maximum Power Point Tracking
- IP65 Protection
- 97.2% Max. Efficiency
- Remote Monitoring
- Anti-Islanding Protection
- MNRE & IEC Compliance
- Wide voltage range and low start-up voltage
- Friendly and adaptable connection to the grid
Luminous Nxi 2 Kw On Grid Solar Inverter
- Maximum Power Point Tracking
- IP65 Protection
- Remote Monitoring
- Anti-Islanding Protection
- MNRE & IEC Compliance
- 97.% Max. efficiency
- Wide voltage range and low start-up voltage
- Friendly and adaptable connection to the grid
- Super high frequency switching technology
- Precise MPPT algorithm
- Compact and lightweight
- WiFi/GPRS Real time monitoring
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Displa
Luminous Nxi 3 Kw On Grid Solar Inverter
Best-in-class reliability and compliance to safety standards.
- Maximum Power Point Tracking
- 97.2% Max. Efficiency
- Remote Monitoring
- Anti-Islanding Protection
- MNRE & IEC Compliance
- Wide voltage range and low start-up voltage
- Friendly and adaptable connection to the grid
- Super high frequency switching technology
- Precise MPPT algorithm
- Compact and lightweight
- WiFi and Real time monitoring
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Display
Enphase IQ7 A Microinverter (Pack of 6)
Easy to Install
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Optimized for high powered 60-cell, 72-cell* and 96-cell* modules
- More than a million hours of testing
- Highest CEC efficiency of 97%
- Class II double-insulated enclosure
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
Luminous Nxi 5 KW On Grid Solar Inverter
Luminous Grid Tied Inverters are powerful inverters that converts direct current (DC) electricity into alternating current (AC), It is also called On grid system which works without battery.The Main purpose of Grid tied inverter is to supply power from Mains supply to home/offices and feed the Generation of solar Power to Mains supply
Grid Tie Inverters are designed to quickly disconnect from the grid if the utility grid goes down. It ensures that in the event of a blackout, the grid tie inverter will shutdown to prevent the energy it transfers from harming any line workers who are sent to fix the power grid.
Best-in-class reliability and compliance to safety standards.
- Super high frequency switching technology
- WiFi and Real time monitoring
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Display
- Maximum Power Point Tracking
- 2% Max. Efficiency
- Remote Monitoring
- Friendly and adaptable connection to the grid
Enphase IQ7 PLUS Microinverter
Easy to Install
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Optimized for high powered 60-cell, 72-cell* and 96-cell* modules
- More than a million hours of testing
- Class II double-insulated enclosure
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
Reviews
There are no reviews yet.