| Description | Particulars |
| Solar PCU Capacity | 2KVA 24V |
| Input Voltage Range (min-max) | 45-90 VDC |
| Maximum PV Power Recommended | 2KW |
| Types of Charger | PWM with MPPT |
| Charge Controller Peak Efficiency | 95% |
| Battery Low Buzzer | 10.2V |
| Battery Low Cut | 10.0V |
| Battery High Cut | 15.5V |
| Battery Charging Voltage by SPV | 14.5V |
| Battery Charging Current by SPV | 18A |
| Battery Charging Voltage by GRID | 14.2V |
| Battery Charging Current by GRID | 10A |
| Grid Low Cut Voltage ( IT Load Disable/Enable) | 120/175V |
| Grid High Cut Voltage ( IT Load Disable/Enable) | 280/255V |
| Inverter Nominal Output Voltage | 230VAC |
| Output Supply Phase | 1 phase, 3 wire |
| Output Waveform | Sine wave |
| Nominal Frequency | 50.0 HZ |
| Load Current | 6.1 A |
| Inverter Peak Efficiency | >88% |
| Protections | Overload, Battery low, Battery high, Output low, Output high, Output Short Circuit, Overheat, Under Frequency, Over Frequency, Solar panel reverse |
| Display Parameters | Battery Voltage, Charging Current, Discharging Current* Solar Voltage, Solar Current, Instantaneous Power, Grid Voltage, I/P Frequency Output Voltage, Output Load% O/P Frequency Grid, Inverter & SPV Charger Status |
| Switches | Reset for System ON/OFF, up, Down, Back, Enter (for LCD Configuration) |
| Indications | System ON, Inv. ON, SPV Charging, Grid Charging, Battery Low/High, Overload, Overheat, Mains Low, Mains High, Under frequency, Over frequency, (IT Mode, Grid Charging, NLSD, Boost Charging, DG Mode)Enable/Disable* |
| Max Relative Humidity @25*C (non condensing) | 95% |
| Weight | 30KG |
| Dimension (L X W X H) | 457 X 254 X 431 mm |
-26%Sold out
UTL Gamma Plus Inverter 2KVA/24 V
Original price was: ₹34,009.00.₹24,999.00Current price is: ₹24,999.00.
- MPPT Solar charge controller
- Advanced LCD display with multi features
- High efficiency inverter with MPPT
- Capability 100% panel rating
- 2KVA solar panel support
- DSP controlled display
- Cooling temperature fan
- Battery Health For Longer Life
- Pure sine wave inverter
- Utilizes maximum power available from the panel
Gamma PCU is a Solar Power Conditioning Unit (PCU) which uses Solar energy (primary) and also the power from grid (secondary), to charge the batteries. Since usage of power from grid is secondary, grid power is only used when solar energy is not present and battery voltage level reduces to a certain level. Grid power is also needed when solar power is reduced to a certain level and battery voltage is reduced to a certain level.
Out of stock
Description
Related products
Livguard Solar UPS LS OG1850 24 Volt
Livguard Solar LS OG1150 Solar UPS has in built 50Amps solar charge controller which extracts maximum power from upto 900wp solar panels to charge the battery in short time. Livguard Solar OG1150 UPS has in-built intelligent real time clock (RTC) technology which optimized solar energy utilization based on localized power situation. It also provides additional safety and protection over voltage/current protection in bypass mode technology.
- Max Solar PV Panel(Wp) – 1500W
- Technology – Pure Sine Wave
- Warranty – 24 Months
- Service Type - On-Site Service by Livguard
- Application – Inverter
- 25% Faster Charge
- Voltage – 24V
- Capacity – 1500 VA
- LED Display
- Max Supported Solar Panel Power - 1600 Wp
- PWM charge controller
- 2 Battery Required for this Inverter
- Charge Controller - PWM, 50Amps
Livguard Solar UPS LS OG1150 Pure Sine Wave Inverter 12 Volt
- Max Solar PV Panel(Wp) – 900W
- Technology – Pure Sine Wave
- Warranty – 24 Months
- Service Type - On-Site Service by Livguard
- Application – Inverter
- 25% Faster Charge
- Voltage – 12V
- Capacity – 900 VA
- LED Display
Luminous Solarverter PRO PCU – 3 KVA
Product Features: -
Rated AC power - 230V (single phase) Max Supported Panel Power - 3500 Wp,
Input Voltage Range (Vmp) – 60V-120V Charge Controller - MPPT,
Input Voltage Range (Voc)- 75V-150V Nominal Battery Bank Voltage - 36V BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Luminous Nxi 4 kw On Grid Solar Inverter
- Super high frequency switching technology
- Precise MPPT algorithm
- Compact and lightweight
- WiFi and Real time monitoring
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Display
- Maximum Power Point Tracking
- IP65 Protection
- 97.2% Max. Efficiency
- Remote Monitoring
- Anti-Islanding Protection
- MNRE & IEC Compliance
- Wide voltage range and low start-up voltage
- Friendly and adaptable connection to the grid
UTL Gamma Solar PCU 2KVA/48 V
- MPPT Solar charge controller
- Advanced LCD display with multi features
- High efficiency inverter with MPPT
- Capability 100% panel rating
- 2KVA solar panel support
- DSP controlled display
- Cooling temperature fan
- Battery Health For Longer Life
- Pure sine wave inverter
- Utilizes maximum power available from the panel
UTL ALFA+ Solar PCU 15KVA 240V
- Inbuilt rMPPT Charge Controller
- USB Based Communication
- DSPic Based Pure Sine Wave Design
- Reverse AC Voltage Protection
- AC and DC Energy Meter Inbuilt
- Robust Design for 20 years product life
- GSM/GPRS Based Remote Monitoring and controlling
- NLSD, Alfa+Solar PCU Grid Charging, IT Load - Enable/Disable by LCD
Enphase IQ7 PLUS Microinverter (Pack of 6)
Easy to Install
- Lightweight and simple
- Faster installation with improved, lighter two-wire cabling
- Optimized for high powered 60-cell, 72-cell* and 96-cell* modules
- More than a million hours of testing
- Class II double-insulated enclosure
- Complies with advanced grid support, voltage and frequency ride-through requirements
- Remotely updates to respond to changing grid requirements
- Configurable for varying grid profiles
Enphase Envoy-S Metered Multiphase
MODEL NUMBER
Envoy-S Metered Multiphase
ENV-S-WM-230
Enphase Envoy-S communications gateway with integrated PV and consumption metering.
Includes two CTs (100A limit). Production and consumption meter: +/-1% accuracy.
ACCESSORIES (Order Separately)
Current transformers (CTs)
CT-100-SPLIT
Lead length 4 m, extendable to 213 m depending on wire type (see installation manual).
WxHxD: 61 mm x 51 mm x 35 mm.
Order extra CTs if monitoring multiple phases.
Enphase Mobile Connect™
CELLMODEM-02
Plug and play industrial grade mobile modem with five-year data plan for systems up to 60
microinverters. (Available where there is adequate mobile service in the installation area.)
Power line communications phase coupler Required for multiphase PV systems
POWER REQUIREMENTS
Hardwired 230 VAC or 400Y/230 VAC, 50 Hz
Max 20A over current protection required
CAPACITY
Number of microinverters polled Up to 600
MECHANICAL DATA
Dimensions (WxHxD) 213 x 126 x 45 mm
Weight 0.5 kg
Ambient temperature range -40° to 65° C
-40° to 46° C if installed in an enclosure
Environmental rating IP30. For installation indoors or in an IP54-rated (or better) enclosure.
Altitude To 2000 meters
USB ports Two USB 2.0 ports, auto-sensing, auto-negotiation
INTERNET CONNECTION OPTIONS
Integrated Wi-Fi 802.11b/g/n (2.4 GHz, 5 GHz)
Ethernet Optional, 802.3, Cat5E (or Cat 6) UTP Ethernet cable (not included)
Mobile Optional, CELLMODEM-02 (not included)
COMPLIANCE
Compliance IEC/EN 61010-1:2010,
EN50065-1, EN61000-4-5, EN61000-6-1, EN61000-6-2
Reviews
There are no reviews yet.