Particulars | Description |
Model | 675/25A 12V |
Nominal Grid Voltage | 230V |
Battery Low Buzzer | 10.8V |
Battery Low Cut | 10.5V |
Battery High Cut | 17V |
SPV Current | 25A |
Grid – Battery Charging Voltage (Equalize) | After 30 Days |
Grid – Battery Charging Current | 10A/12.5A |
Grid Reconnect @ Battery Voltage | 11.8V |
Output Phase | 1 Phase, 3Wire |
Nominal Output Voltage | 240V±5% |
Nominal Frequency | 50Hz±1% |
Output Waveform | Modified Sinewave |
Typical Efficiency | ≥82% |
Protection | Overload, Battery Low, Battery High, Output Short, Battery Reverse, Phase Reverse, Over Heat, SPV High. |
LED Indication | System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable, Mains Status, Overload, Grid Chg., Inverter ON, Battery Status, SPV Chg., Fault |
Switches | System ON, (IT Mode, SMF/TUB, Boost Chg., Grid Chg.) Enable/Disable |
Type of Charger | PWM |
Efficiency | >95% |
Input Voltage Range (Min – Max)Voc | 17V-25V |
Maximum PV Power Recommended | (150W/160W) x 4 |
Operating Temperature | 0-50°C |
-23%Sold out
Previous product
Back to products
UTL ALFA+ Solar PCU 10KVA 120V
₹151,200.00 Original price was: ₹151,200.00.₹126,000.00Current price is: ₹126,000.00.
UTL Solar Inverter Shamsi 675 – 12V/25A
₹6,234.00 Original price was: ₹6,234.00.₹4,800.00Current price is: ₹4,800.00.
- Built-in IT mode
- Auto equalize in a month
- Inbuilt PWM Solar Charge Controller
- LED Display for Operation & Fault
- Modified sine wave output
- Maintain battery health for longer life
- Battery Charging with Multi stage (Bulk, Absorption & Float)
- Protections: RBP, RSPV, OVL, BL, OBC, SC, IHV & ILV
The Shamsi solar inverter feeds the battery installed to it at a constant boost charging current until its voltage reaches 14.58V and the float current, which maintains the voltage above 13.8V.
A sine wave output is also known as waveform for electronic equipment. The incoming AC line is a sine wave, thus electronic equipment expects to see this type of waveform. A sine wave is the most expensive output form for solar manufacturers to produce due to more complex circuitry and components
Out of stock
Category: Off Grid Solar Inverters
Description
Reviews (0)
Be the first to review “UTL Solar Inverter Shamsi 675 – 12V/25A” Cancel reply
Related products
Luminous Solarverter PRO PCU – 3 KVA
Product Features: -
Rated AC power - 230V (single phase) Max Supported Panel Power - 3500 Wp,
Input Voltage Range (Vmp) – 60V-120V Charge Controller - MPPT,
Input Voltage Range (Voc)- 75V-150V Nominal Battery Bank Voltage - 36V BIS certified solar inverter In-built TDR for loads with heavy in-rush current Inbuilt MPPT charge controller to maximize solar generation from solar panels Inbuilt isolation transformer to protect from grid surges and noise User selectable source priority: Choose source priority from solar, battery and grid User friendly Informative LCD Display MCB protection against short circuit protection Pure sine wave output for better performance & safety of connected loads Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
UTL Gamma Plus Inverter 2KVA/24 V
- MPPT Solar charge controller
- Advanced LCD display with multi features
- High efficiency inverter with MPPT
- Capability 100% panel rating
- 2KVA solar panel support
- DSP controlled display
- Cooling temperature fan
- Battery Health For Longer Life
- Pure sine wave inverter
- Utilizes maximum power available from the panel
UTL Shamsi 875 – 12V/50A
- Built-in IT mode
- Auto equalize in a month
- Inbuilt PWM Solar Charge Controller
- LED Display for Operation & Fault
- Modified sine wave output
- Maintain battery health for longer life
- Battery Charging with Multi stage (Bulk, Absorption & Float)
- Protections: RBP, RSPV, OVL, BL, OBC, SC, IHV & ILV
Luminous Solarverter Pro PCU 3.5 Kva 48V
Product Description: -
The Solarverter PRO PCU - 3.5KVA / 48V can be used to power a variety of loads, including lights, fans, refrigerators, and televisions. It can also be used to charge batteries for backup power during a power outage.
Product Features: -
- Rated AC power - 230V (single phase)
- Max Supported Panel Power - 3500 Wp, Input Voltage Range (Vmp) – 110V-180V
- Charge Controller - MPPT, Input Voltage Range (Voc)- 130V-220V
- Nominal Battery Bank Voltage - 48V
- BIS certified solar inverter
- In-built TDR for loads with heavy in-rush current
- Inbuilt MPPT charge controller to maximize solar generation from solar panels
- Inbuilt isolation transformer to protect from grid surges and noise
- User selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display
- MCB protection against short circuit protection
- Pure sine wave output for better performance & safety of connected loads
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
UTL ALFA+ Solar PCU 2KVA 48V
- Inbuilt rMPPT Charge Controller
- USB Based Communication
- DSPic Based Pure Sine Wave Design
- Reverse AC Voltage Protection
- AC and DC Energy Meter Inbuilt
- Robust Design for 20 years product life
- GSM/GPRS Based Remote Monitoring and controlling
- NLSD, Alfa+Solar PCU Grid Charging, IT Load - Enable/Disable by LCD
UTL Shamsi 1475 – 24V/50A
- Built-in IT mode
- Auto equalize in a month
- Inbuilt PWM Solar Charge Controller
- LED Display for Operation & Fault
- Modified sine wave output
- Maintain battery health for longer life
- Battery Charging with Multi stage (Bulk, Absorption & Float)
- Protections: RBP, RSPV, OVL, BL, OBC, SC, IHV & ILV
UTL ALFA+ Solar PCU 7.5KVA 96V
- Inbuilt rMPPT Charge Controller
- USB Based Communication
- DSPic Based Pure Sine Wave Design
- Reverse AC Voltage Protection
- AC and DC Energy Meter Inbuilt
- Robust Design for 20 years product life
- GSM/GPRS Based Remote Monitoring and controlling
- NLSD, Alfa+Solar PCU Grid Charging, IT Load - Enable/Disable by LCD
Luminous Solar PCU – NXT+ 3.75 KVA
Rated 5.00 out of 5
- Charge Controller - MPPT, Input Voltage 80-165 Voc
- Rated AC power - 230V, 13A, Single phase
- Nominal Battery Bank Voltage - 48V
- Max Supported Panel Power - 3000 Wp, Input Voltage Range (Vmp) - 65-130V
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- Inbuilt isolation transformer to protect from grid surges and noise
- Selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display for time charging, Supply etc
- Dual MCB protection against short circuit protection for AC and DC
- Pure sine wave output for safety and noiseless operation of connected appliances.
- Intelligent system with 32 bit DSP Controller which enables it to handle multiple algorithms efficiently
- Compliance to most of the National & International standards for safety and efficiency and reliability, such as IEC - 61683, IEC - 60068 - 1,2,14,30, IEC - 60529
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery over-charge and battery deep-discharge.
Reviews
There are no reviews yet.