| Particulars | Description |
| Solar PCU Capacity | 10KVA 180V |
| Input Voltage Range (Min-Max) | 160-450 VDC |
| Maximum PV Power Recommended | 7.5KW |
| MPPT Controller | DSP |
| Type of Charger | MPPT |
| Efficiency | 95% |
| Battery Low Buzzer | Battery Low Cut +0.2 V |
| Battery Low Cut | 10-11.7 V |
| Battery High Cut (INV.) | SPV Present-SPV CHG. REF +1V for 15Sec, SPV CHG. REF +1.5V for 2Sec |
| Battery High Cut (INV.) | SPV Absent-SPV CHG. REF for 15Sec, SPV CHG. REF +0.2V for 2Sec |
| Battery Charging Voltage by SPV | 13.5-16 V |
| Battery Charging Current by SPV | 12-60 A |
| Battery Charging Voltage by Grid | 13.0-15.5 V |
| Battery Charging Current by Grid | 6-15 A |
| Grid Low Cut Voltage (IT Mode/Normal) | NA/120-200 V |
| Grid High Cut Voltage (IT Mode/Normal) | NA/245-280 V |
| Grid Charging | Enable/Disable |
| IT Load | Enable/Disable |
| Operating Mode | Smart/PCU/Hybrid |
| Output Voltage Low | 170-190 V |
| Output Voltage High | 250-260 V |
| No Load Shut Down | Enable/Disable |
| Input Source | Grid/Genset |
| Grid Disconnect (Solar Available) PCU/SMART (Battery) | @14.5/Battery for 2minutes or 13.5/Battery-100% Current |
| Grid Reconnect (PCU Mode/Smart Mode) (Battery) | 11-12V |
| Temp. Compensation (Battery) | @3mV/cell/°C ; 18mV/Battery/°C |
| Inverter Switching Element | Mosfet |
| Inverter Control | PWM |
| Inverter Nominal Output Voltage | 220 VAC |
| Inverter Output Supply Phase | 1Phase, 3Wire |
| Inverter Output Waveform | Pure Sine Wave |
| Inverter Nominal Frequency | 50.0 Hz |
| Load Current | 27 A |
| Voltage Regulation | 1% |
| Output Voltage Distortion with 100% Linear Load | <3% |
| Peak Efficiency | >88 % |
| Cooling | Temp Controlled, Fan |
| Protections | Overload, Battery Low, Battery High, Output Low, Output High, Output Short Ckt., Overheat, Under Frequency, Over Frequency, Solar Panel Reverse |
| Display Parameters | Battery Voltage, Charging Current, Discharging Current, Charging KWH, Discharging KWH, Solar Voltage, Solar Current, Instantaneous Power, Cumulative Power, Grid Voltage, Grid Current, Grid Frequency, Output Voltage, Output Current, Output Frequency NLSD En/Dn, IT Load En/Dn Grid Charger En/Dn, Operating Mode PCU/SMT/HYD |
| Switches | Reset for System ON/OFF, UP, DOWN, BACK, ENTER (for LCD Configuration) |
| Indications | System ON, Inverter ON, SPV Charging, Grid Charging, Battery Low/High, Overload, Overheat, Mains Low, Mains High, Under Frequency, Over Frequency, NLSD, Fault |
| Degree of Protection | IP21 |
| Dimension (LxWxH) | 24 X 13 X 23 Inch |
| Weight (Approx) | 65 KG |
-23%Sold out
Previous product
Back to products
UTL ALFA+ Solar PCU 10KVA 120V
Original price was: ₹151,200.00.₹126,000.00Current price is: ₹126,000.00.
UTL ALFA+ Solar PCU 7.5KVA 96V
Original price was: ₹101,304.00.₹78,000.00Current price is: ₹78,000.00.
- Inbuilt rMPPT Charge Controller
- USB Based Communication
- DSPic Based Pure Sine Wave Design
- Reverse AC Voltage Protection
- AC and DC Energy Meter Inbuilt
- Robust Design for 20 years product life
- GSM/GPRS Based Remote Monitoring and controlling
- NLSD, Alfa+Solar PCU Grid Charging, IT Load – Enable/Disable by LCD
Alfa PCU is a Solar Power Conditioning Unit (PCU) which uses Solar energy (primary) and also the power from grid (secondary), to charge the batteries. Since usage of power from grid is secondary, grid power is only used when solar energy is not present and battery voltage level reduces to a certain level. Grid power is also needed when solar power is reduced to a certain level and battery voltage is reduced to a certain level.
Out of stock
Description
Related products
UTL ALFA+ Solar PCU 10KVA 180V
- Inbuilt rMPPT Charge Controller
- USB Based Communication
- DSPic Based Pure Sine Wave Design
- Reverse AC Voltage Protection
- AC and DC Energy Meter Inbuilt
- Robust Design for 20 years product life
- GSM/GPRS Based Remote Monitoring and controlling
- NLSD, Alfa+Solar PCU Grid Charging, IT Load - Enable/Disable by LCD
Enphase Envoy-S Metered Multiphase
MODEL NUMBER
Envoy-S Metered Multiphase
ENV-S-WM-230
Enphase Envoy-S communications gateway with integrated PV and consumption metering.
Includes two CTs (100A limit). Production and consumption meter: +/-1% accuracy.
ACCESSORIES (Order Separately)
Current transformers (CTs)
CT-100-SPLIT
Lead length 4 m, extendable to 213 m depending on wire type (see installation manual).
WxHxD: 61 mm x 51 mm x 35 mm.
Order extra CTs if monitoring multiple phases.
Enphase Mobile Connect™
CELLMODEM-02
Plug and play industrial grade mobile modem with five-year data plan for systems up to 60
microinverters. (Available where there is adequate mobile service in the installation area.)
Power line communications phase coupler Required for multiphase PV systems
POWER REQUIREMENTS
Hardwired 230 VAC or 400Y/230 VAC, 50 Hz
Max 20A over current protection required
CAPACITY
Number of microinverters polled Up to 600
MECHANICAL DATA
Dimensions (WxHxD) 213 x 126 x 45 mm
Weight 0.5 kg
Ambient temperature range -40° to 65° C
-40° to 46° C if installed in an enclosure
Environmental rating IP30. For installation indoors or in an IP54-rated (or better) enclosure.
Altitude To 2000 meters
USB ports Two USB 2.0 ports, auto-sensing, auto-negotiation
INTERNET CONNECTION OPTIONS
Integrated Wi-Fi 802.11b/g/n (2.4 GHz, 5 GHz)
Ethernet Optional, 802.3, Cat5E (or Cat 6) UTP Ethernet cable (not included)
Mobile Optional, CELLMODEM-02 (not included)
COMPLIANCE
Compliance IEC/EN 61010-1:2010,
EN50065-1, EN61000-4-5, EN61000-6-1, EN61000-6-2
Luminous Nxi 5 KW On Grid Solar Inverter
Luminous Grid Tied Inverters are powerful inverters that converts direct current (DC) electricity into alternating current (AC), It is also called On grid system which works without battery.The Main purpose of Grid tied inverter is to supply power from Mains supply to home/offices and feed the Generation of solar Power to Mains supply
Grid Tie Inverters are designed to quickly disconnect from the grid if the utility grid goes down. It ensures that in the event of a blackout, the grid tie inverter will shutdown to prevent the energy it transfers from harming any line workers who are sent to fix the power grid.
Best-in-class reliability and compliance to safety standards.
- Super high frequency switching technology
- WiFi and Real time monitoring
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Display
- Maximum Power Point Tracking
- 2% Max. Efficiency
- Remote Monitoring
- Friendly and adaptable connection to the grid
Luminous Nxi 4 kw On Grid Solar Inverter
- Super high frequency switching technology
- Precise MPPT algorithm
- Compact and lightweight
- WiFi and Real time monitoring
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Display
- Maximum Power Point Tracking
- IP65 Protection
- 97.2% Max. Efficiency
- Remote Monitoring
- Anti-Islanding Protection
- MNRE & IEC Compliance
- Wide voltage range and low start-up voltage
- Friendly and adaptable connection to the grid
UTL ALFA+ Solar PCU 1KVA 24V
- Inbuilt rMPPT Charge Controller
- USB Based Communication
- DSPic Based Pure Sine Wave Design
- Reverse AC Voltage Protection
- AC and DC Energy Meter Inbuilt
- Robust Design for 20 years product life
- GSM/GPRS Based Remote Monitoring and controlling
- NLSD, Alfa+Solar PCU Grid Charging, IT Load - Enable/Disable by LCD
Luminous Solarverter Pro PCU 3.5 Kva 48V
Product Description: -
The Solarverter PRO PCU - 3.5KVA / 48V can be used to power a variety of loads, including lights, fans, refrigerators, and televisions. It can also be used to charge batteries for backup power during a power outage.
Product Features: -
- Rated AC power - 230V (single phase)
- Max Supported Panel Power - 3500 Wp, Input Voltage Range (Vmp) – 110V-180V
- Charge Controller - MPPT, Input Voltage Range (Voc)- 130V-220V
- Nominal Battery Bank Voltage - 48V
- BIS certified solar inverter
- In-built TDR for loads with heavy in-rush current
- Inbuilt MPPT charge controller to maximize solar generation from solar panels
- Inbuilt isolation transformer to protect from grid surges and noise
- User selectable source priority: Choose source priority from solar, battery and grid
- User friendly Informative LCD Display
- MCB protection against short circuit protection
- Pure sine wave output for better performance & safety of connected loads
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, battery overload, etc.
Luminous Nxi 1 Kw On Grid Solar Inverter
Best-in-class reliability and compliance to safety standards.
- Maximum Power Point Tracking
- IP65 Protection
- Remote Monitoring
- Anti-Islanding Protection
- Remote Communication
- MNRE & IEC Compliance
- 80% Max. efficiency
- Wide voltage range and low start-up voltage
- Friendly and adaptable connection to the grid
- Super high frequency switching technology
- Precise MPPT algorithm
- Compact and lightweight
- WiFi/GPRS Real time monitoring
- Safe for your home with comprehensive protection features such as short-circuit, reverse polarity, anti-islanding, residual current detection
- Inbuilt MPPT charge controller extracts upto 30% more power from Panels
- User friendly Informative LCD Display
UTL Gamma Solar PCU 5KVA/48 V
- MPPT Solar charge controller
- Advanced LCD display with multi features
- High efficiency inverter with MPPT
- Capability 100% panel rating
- 2KVA solar panel support
- DSP controlled display
- Cooling temperature fan
- Battery Health For Longer Life
- Pure sine wave inverter
- Utilizes maximum power available from the panel
Reviews
There are no reviews yet.